PPH Series Screwing Cap Type Polypropylene Homopolymer (PPH) Bag Filter Housing is made of PP reinforced polypropylene material, which is integrally injection-molded, without welding, no side leakage, easy to install and maintain. PPH bag filter housing has acid and alkali resistance, high temperature resistance, high pressure resistance, good softness and easy molding. The choice of PPH single bag filter housing is mostly due to the particularity of liquid, strong acid, strong alkali, high temperature, and highly corrosive liquids, and traditional stainless steel filter housing materials are not suitable for application. The PPH bag filter housing makes up for the shortcomings of the stainless steel filter housing, and also greatly saves the equipment cost of industry filtration systems.
| Housing Material | PPH(Polypropylene Homopolymer) |
| Housing Direction | Vertical |
| Bag Size | Size #1: Φ7"x17"L(Φ180x430mm) |
| Size #2: Φ7"x32"L(Φ180x810mm) | |
| Size #4: Φ4"x15"L(Φ105x380mm) | |
| Size #5: Φ6"x20"L(Φ150x510mm) | |
| Size #6: Φ7"x22"L(Φ180x560mm) | |
| Number of Bag | Single |
| Housing Thickness | 16mm |
| Filtration Rating | 1μm - 800μm |
| Connection | Side Port |
| Inlet/Outlet Type | Flange |
| Inlet/Outlet Size | DN40, DN50, DN65, DN80 |
| Sealing Type | Screwing Cap Type |
| Seal Material | Viton |
● Acid and alkali resistance, high temperature resistance
● Integrally injection-molded, no welding points, no leakage
● PPH bag filter housing has smooth inner wall for easy cleaning
● PPH single bag filter housing is 360 degree sealing, high precision filtration
● No tools required for use and maintenance, easy and quick to replace the filter bag
● PPH filter bag housings are compatible with international standard water filter bags
● Metal Processing
● Chemical Industry
● Inks and Coatings
● Acid-base Solution Filtration
● Electroplating Filtration Industry
● Pre-filtration of High-purity Water
Operation Data for PPH Single Bag Filter Housing
| Max. Temperature | 90°C |
| Max. Pressure | 116psi(8bar) |
| Liquid Flow Direction | Side in and side out |
| Flow Rate(Single Filter Bag) | Size #1 (Φ7"x17"): 20m³/h |
| Size #2 (Φ7"x32"): 40m³/h | |
| Size #4 (Φ4"x15"): 12m³/h | |
| Size #5 (Φ6"x20"): 22m³/h | |
| Size #6 (Φ7"x22"): 25m³/h | |
| Filtration Area(Single Filter Bag) | Size #1 (Φ7"x17"): 0.25㎡ |
| Size #2 (Φ7"x32"): 0.5㎡ | |
| Size #4 (Φ4"x15"): 0.12㎡ | |
| Size #5 (Φ6"x20"): 0.3㎡ | |
| Size #6 (Φ7"x22"): 0.35㎡ | |
| Bag Housing Capacity/Weight | Size #1 (Φ7"x17"): 20.3L/15.3KG |
| Size #2 (Φ7"x32"): 32L/24.2KG | |
| Size #4 (Φ4"x15"): 6.5L/5.9KG | |
| Size #5 (Φ6"x20"): 12.8L/10.8KG | |
| Size #6 (Φ7"x22"): 24L/18KG |
PPH Bag Filter Housing Parts Function Description
| ● A protection switch can be installed to monitor the status of the upper cover, mainly used to connect to PCL system | ||||||||||||
| ● The inner surface of the shell is smooth and easy to clean | ● Hold the handles on both sides, can easily open the top cover | |||||||||||
| ● Universal flange, can be used with estimated standard pipe flanges | ● The upper cover can be matched with pressure gauges and various variable sensors | |||||||||||
| ● The mesh basket adopts one-piece design and is equipped with a lifting handle, which is convenient and quick to take out when cleaning and maintenance are required | ||||||||||||
| ● The connection flange of the liquid inlet and outlet of the shell adopts an integrated design and is integrated into the fluid conveying system. It is fast to install, simple to match, safe and reliable. | ||||||||||||
| ● There is a seal between the outside of the top of the basket and the inner wall of the housing. Under the pressing action of the pressure ring, a 360-degree seal is formed between the filter bag and the shell | ||||||||||||
| ● Two-layer mechanism design of the upper cover, the inner cover plate presses the sealing ring vertically, and the outer cover will not cause friction and local extrusion when the outer cover is screwed, because the sealing performance is excellent. | ||||||||||||
Polypropylene Bag Filter Housing Parallel Connection Method
PPH Bag Filter Housing Production Workshop
Components & Drawing of PPH Series PPH Bag Filter Housing
● Every accessory of the PPH bag filter housing is standard
● Easy to install and maintain, easy to replace the filter bag
● Bag Filter Housing is overall molding, compact structure, excellent quality
● Save space, save manpower and operating costs, economical and applicable
● The accessories are durable and long service life, the system is safe and secure
How to Install The PPH Bag Filter Housing?
1. Be sure to clean all the sealing rings and the sealing ring fixing groove of the filter housing before use, and then place the sealing ring in the sealing ring fixing groove naturally.
2. Put the filter bag into the mesh basket inside the housing, so that the ring of the filter is close to the inner wall of the filter barrel (for the housing with the barrel wall seal) or the inner wall of the basket (for the housing with the wall seal of the basket wall).
3. Place the filter bag press ring vertically above the filter bag ring and press the filter bag ring.
4. Place the inner pressure plate of the upper cover on the upper opening of the housing, and press the sealing ring evenly.
5. Screw the bag filter housing cover clockwise onto the housing.
6. Fit the pressure gauge fitting and install the pressure gauge.
7. Close the drain valve, open the inlet and outlet valves, and start the pump.
| PPH | Bag Dimensions | Number of Bag | Inlet/Outlet Size(Flange) |
PPH Series PPH Single Bag Filter Housing | S1 = Size #1 (Φ7"x17") | 1 = 1pc | N40 = DN40 |
| S2 = Size #2 (Φ7"x32") | |||
| S4 = Size #4 (Φ4"x15") | N50 = DN50 | ||
| S5 = Size #5 (Φ6"x20") | N65 = DN65 | ||
| S6 = Size #6 (Φ7"x22") | N80 = DN80 |
For Example:
PPH-S2-1-N65
PPH Series PPH Single Bag Filter Housing - Size #2: Ø7"× 32" - 1pc - DN65
Hongtek Filtration Co., Ltd.
Copyright © Hongtek Filtration Co., Ltd. All Rights Reserved | Sitemap
