BF Series High Flow Pleated Bag Filters are made of high-quality pleated depth polypropylene and 100% repalce to Pall Marksman high flow bag filters. High quality pleated bag filter cartridges could be easily retrofit into existing Size 1 and Size 2 filter bag housings. One piece of Size 2 high flow pleated bag filters replaces up to 16pcs standard 10"(254mm) depth filters, making change-outs quick and easy.
High flow bag pleated filters are inside-to-outside fluid flow, combining the performance advantages of filter cartridges and filter bags used in bag filter systems. High flow bag filters provide high quality benefits and economic value, not only shown in more effective filtration area with higher flow rate brought by pleated design, but also shown in longer service life and lower operating costs.
| Filter Media | Polypropylene Pleated |
| Nominal Length | 16"(405 mm) for size 1 bag, 31"(785 mm) for size 2 bag, 40" Length |
| Outside Diameter | 6 inch(152mm) |
| Filtration Rating | 1μm, 3μm, 5μm, 10μm, 20μm, 40μm, 70μm, 100μm |
| Support/Drainage | Polypropylene (PP) |
| End Cap Material | Polypropylene (PP) |
| Outer Support Cage | Polypropylene (PP) |
| Seal Material | EPDM, NBR |
● 100% repalce to Pall Marksman Series pleated bag filters
● Easy operation, simply maintenance and lower operating costs
● Improve filter bags design, pleated bag filters provide high efficiencies & flow rates
● 6 inch large high flow bag filters diameter suitable for high flow contaminant applications
● Inside-to-outside fluid flow ensure the impurities trapped inside high flow pleated bag filters
● High flow bag pleated filters offer broad chemical compatibility and high dirt-holding capacity
● High quality pleated bag filter cartridges and easily retrofit into existing Size 1 and Size 2 bag housings
● Paints, Ink and coatings
● Oil and water separation industry
● Food and beverage water filtration
● Water filtration in Power generation
● Microelectronic, film, CD/DVD and resin
● Prefiltration of RO and sea water desalination
● Solvents, API and water filtration in pharmaceutical field
Operation Date for BF Series High Flow Pleated Bag Filters
| Maximum Operating Temperature | 70℃ |
| Maximum Differential Pressure | 5.1 bar @ 20℃ (75 psi @ 68°F) |
| 2.4 bar @ 54℃ (35 psi at 130°F) | |
| Recommended Change out Differential Pressure | 2.4 bar at 54℃ (35 psi at 130°F) |
Pressure-Drop for Size 1 High Flow Pleated Bag Filters
3D Drawing for BF Series High Flow Pleated Bag Filters
 | ● Innovative push-in flanges enable quick and convenient change outs ● High surface area design provides high flow capacity and longer service life ● High flow bag filters are inside-out flow direction which is correspondent with bag filter ● No bypass, high flow capacity, all polypropylene construction and wide chemical compatibility ● Pleated bag filters manufactured by advanced thermal welding techniques, free of binders and additives | ||||||||||
Installation Example for BF Series High Flow Pleated Bag Filters
 | ● Inside-out flow effectively traps contaminants inside the filter elements ● Available to fit most Size 1 and Size 2 bag vessels with no hardware changes ● High quality pleated bag filter cartridges and easily retrofit into existing Size 1 and Size 2 filter bag housings ● With advantages of big flow rate and high purity, fewer change outs and lower maintenance cost are required ● Innovative push-in flanges enable quick and convenient replacements into most commercial bag filter housings | ||||||||||
| BF | Material | Nominal Length | Filtration Rating | O-ring Material |
BF Series High Flow Pleated Bag Filters | P = Polypropylene | 1 = Size 1 Bag | 1 = 1μm | E = EPDM |
| 3 = 3μm | ||||
| 5 = 5μm | ||||
| 2 = Size 2 Bag | 10 = 10μm | |||
| 20 = 20μm | V = Viton | |||
| 40 = 40μm | ||||
| 40 = 40" Length | 70 = 70μm | |||
| 100 = 100μm |
For Example:
BF-P-2-5-E
BF Series High Flow Pleated Bag Filters - Polypropylene - Size 2 Bag - 5μm - EPDM
Hongtek Filtration Co., Ltd.
Copyright © Hongtek Filtration Co., Ltd. All Rights Reserved | Sitemap
