HFP Series Pleated High Flow Filter Cartridges are Parker Fulflo MaxGuard replacement filters. The high flow cartridge filters provide a cost effective alternative to standard 2.5 inch filter cartridges for high flow applications. High flow filter cartridges have a 6" nominal outside diameter and can handle flow up to 100gpm, signifi cantly reducing the number of cartridge filters required for large flow applications. Pleated high flow filter have standard 226 positive O-ring seal and easy-to grasp integrated handle to reduced labor costs associated with change-out.
| Filter Media | Polypropylene Pleated |
| Length | 30", 40" |
| Outside Diameter | 6 inch(152mm) |
| Filtration Rating | 0.5μm, 1μm, 5μm, 10μm, 20μm |
| Support/Drainage | Polypropylene (PP) |
| End Cap Material | Polypropylene (PP), 226 O-Ring/Flat Cap with handle |
| Seal Material | EPDM, Buna-N, Viton, Silicone |
| Outside | Netting |
● "M" pleated enlarge surface filtration area
● Positive 226 O-ring seal assures filtration integrity
● Integrated handle makes change outs fast, easy and safe
● Manufactured with strict quality control for critical filtration
● All filter cartridges constructed with polypropylene are FDA standard
● The high flow cartridge filters are Parker Fulflo MxGuard replacement filters
● Waste water
● RO pre-filtration
● Power generation
● Commercial water
● Food and beverage
● Sea water desalination
| Maximum Operating Temperature | 176°F (80°C) @ 30psid (2.1bar) |
| Maximum Differential Pressure | 70psid (4.8bar) @ 77°F (25°C) |
| 30psid (2.1bar) @ 176°F (80°C) | |
| Suggested Maximum Flow Rate | 100gpm |
| Liquid Flow Direction | Outside to inside |
Drawing for 40" HFP Series Pleated High Flow Filter Cartridges
High Flow Filter Sample Size Measurement (with tolerances)
| HFP | Material | Length | Filtration Rating | O-ring Material |
HFP Series Pleated High Flow Filter Cartridges | P = PP Pleated | 30 = 30" | 0.5 = 0.5μm | E = EPDM |
| 1 = 1μm | B = Buna-N | |||
| 5 = 5μm | V = Viton | |||
| 40 = 40" | 10 = 10μm | S = Silicone | ||
| 20 = 20μm |
For Example:
HFP-P-40-5-E
HFP Series Pleated High Flow Filter Cartridges - PP Pleated - 40" - 5μm - EPDM
Hongtek Filtration Co., Ltd.
Copyright © Hongtek Filtration Co., Ltd. All Rights Reserved | Sitemap
