HRP Series Horizontal Single FRP High Flow Cartridge Housing with good corrosion resistance, it can be widely used in the area which stainless steel and carbon steel housing can not be used. The flow rate of high flow cartridge is much higher than traditional filter cartridge. Seal high flow filter cartridge, makes changing filter more convenient and easier, unique clamp and seal equipment, makes system more safety and reliable.
High flow FRP cartridge housing has long working life, large flow rate, good dirty capacity and high filtration efficiency. FRP high flow cartridge housing is widely used in RO pre-filtration, sea water desalination, food and beverage, power generation and water treatment system. The high flow solution of FRP cartridge housing can help to save much space and equipment cost, it is a very popular water filtration system.
| Housing Media | FRP (Fibre Reinforced Polymer/Plastic) |
| Housing Direction | Horizontal |
| Cartridge Length | 40", 60" |
| Number of Cartridge | 1 Piece |
| Installed Filter Type | High Flow Filter Cartridge OD 6" |
| Filtration Rating | 1μm - 100μm |
| Connection | Side Port |
| Inlet/Outlet Type | Clamp |
| Inlet/Outlet Size | DN65, DN80 |
| Sealing Type | Clamp |
| Seal Material | EPDM, Buna-N, Viton, Silicon |
● FRP high flow cartridge housing is easy to be installed and low maintenance cost
● High flow FRP cartridge housing has larger water capacity and smaller system space
● Multi FRP high flow filter housings can be combined to meet greater water treatment capacity
● High flow FRP cartridge housing has long working life, good dirty capacity and high filtration efficiency
● The flow rate of single high flow cartridge equal to 18pcs OD 2.5" pleated cartridges and 25pcs depth filters
● RO Pre-filtration
● Water Processing
● Power Generation
● Food and Beverage
● Sea Water Desalination
● Industrial Water Treatment
Operation Data for Horizontal Single FRP High Flow Cartridge Housing
| Working Temperature | 5 - 66°C |
| Max. Pressure | 1 Mpa |
| Connection | Side Port |
| Flow Rate | 40" length: 30m³/h |
| 60" length: 45m³/h |
Combined Horizontal FRP Filter Cartridge Housing
● Triple combined of FRP high flow cartridge housings, up to 90m3/h max high flow rate, easy to install and maintain
● Strong dirt holding capacity, high filtration efficiency, longer service life, lower energy consumption, reduce investment
● Flexible combination according to water capacity need, save much space, lower maintenance costs, economical and applicable
Size of Horizontal Single FRP High Flow Cartridge Housing
| HRP | Cartridge Length | Number of Cartridge | Inlet/Outlet Type | Inlet/Outlet Size | O-ring Material |
HRP Series Horizontal Single FRP High Flow Cartridge Housing | 40 = 40" | 1 = 1pc | C = Clamp | N80 = DN80 | E = EPDM |
| B = Buna-N | |||||
| 60 = 60" | V = Viton | ||||
| S = Silicon |
For Example:
HRP-40-1-C-N80-E
HRP Series Horizontal Single FRP High Flow Cartridge Housing - 40" - 1pc - Clamp - DN80 - EPDM
More Water Treatment Capacity Can Be Combined With Multiple FRP High Flow Cartridge Housing
Hongtek Filtration Co., Ltd.
Copyright © Hongtek Filtration Co., Ltd. All Rights Reserved | Sitemap
